Gate Servicing in Haywards Heath

Haywards Heath has a problem that we see more here than almost anywhere else in Mid Sussex: gates that have never been serviced. The town has hundreds of automated gates on established properties — large detached homes along Balcombe Road, period villas near the station, country houses on Borde Hill Lane — and a significant proportion have been running without maintenance since the day they were installed.

An electric gate motor that runs for ten years without a service is not fine. It is overdue. Bearings are wearing, lubricant has dried, safety devices have drifted, and the control board is slowly corroding. Servicing catches these problems before they become expensive breakdowns.

Servicing: £225+VAT | Free automation survey included

Call us: 07542 024681 | Book online

What a Service Visit Includes

Mechanical Inspection

Every hinge, pivot, motor arm, and track runner is checked for wear, looseness, and correct alignment. On Haywards Heath properties, we pay particular attention to hinge condition on heavy wrought iron gates — the ornate period gates common near the station and in Cuckfield often weigh significantly more than modern aluminium alternatives, putting greater stress on hinges and motor arms.

Motor Assessment

Your engineer checks motor current draw, capacitor health on CAME units, and drainage condition on BFT underground systems. BFT underground motors are common on the larger Haywards Heath properties, particularly along Balcombe Road and Borde Hill Lane. The foundation boxes collect water if the drainage pump or seal fails — a problem that progresses silently until the motor shorts out.

Safety Device Testing

Photocells, safety edges, and auto-reverse functions are tested against current standards. Mature gardens in Haywards Heath regularly obscure photocell beams. Your engineer cleans lenses, realigns beams, and notes any vegetation that needs cutting back.

Control Board Inspection

The board is checked for corrosion, loose connections, and burnt components. Haywards Heath sits on an exposed ridge that catches southerly winds, driving rain into improperly sealed control enclosures. Your engineer checks gaskets, cable entry points, and ventilation.

Lubrication and Limit Adjustment

All moving parts are lubricated with the correct grade for the conditions. Open and close limits are checked — if the gate has shifted due to ground movement or wear, the limits are readjusted so the gate stops cleanly at both ends of travel.

Why Haywards Heath Gates Need Servicing

Your engineer recommends annual servicing as a minimum for all residential gates in Haywards Heath. Gates on shared driveways with heavy cycling should be serviced every six months.

Service Pricing for Haywards Heath

Parts charged separately at cost if anything needs replacing. Always quoted before ordering.

Areas Covered Near Haywards Heath

We also covers gate servicing in these nearby areas:

• Gate servicing in Horsham
• Gate servicing in Burgess Hill
• Gate servicing in Lindfield
• Gate servicing in Crawley
• Gate servicing in Brighton

Also covering: Ardingly, Warninglid, Balcombe, Cuckfield.