Gate Safety Compliance in Horsham

An automated gate is a machine. It weighs hundreds of kilograms and exerts significant force when it moves. If the safety devices are not working correctly, it can crush, trap, or injure. The gate owner is legally responsible for ensuring the gate is safe — and in Horsham, a significant number of older installations do not meet current safety standards.

We're Gate Safe trained and based in Horsham. Your engineer carries out safety inspections, force testing, and risk assessments for residential and light commercial gates across the RH12 and RH13 postcode areas.

Safety inspection: £195+VAT

Call us: 07542 024681 | Book online

Why Gate Safety Matters in Horsham

Horsham has a particularly high number of automated gates that were installed before the current safety standards came into effect. Many properties in Mannings Heath, along the A24 corridor, and in the rural parishes to the south have gates that are 10-15 years old. When these were installed, safety requirements were less stringent. Photocells may be missing or incorrectly positioned, safety edges may never have been fitted, and force testing may never have been carried out.

The problem is compounded by the property types in the area. Rural Horsham properties with long driveways often have gates at the boundary — metres from the house. Deliveries, visitors, and children can approach the gate without the owner knowing. If the safety devices are not functioning, the gate cannot detect someone in its path.

We have inspected gates on properties across Horsham and regularly finds installations that present a real risk of injury. This is not about paperwork. It is about ensuring that the gate will stop if someone or something is in its path.

What a Safety Inspection Covers

Force Testing

We measure the force exerted by the gate at various points in its travel. The force must not exceed the limits specified in BS EN 12445. If the gate exerts too much force, the motor speed, ramp settings, or clutch mechanism needs adjusting — or the safety devices need upgrading to compensate.

Photocell and Sensor Check

Every photocell is tested for correct alignment, detection range, and response time. On rural Horsham properties, vegetation growth is the most common cause of photocell failure — ivy, hedge growth, and overhanging branches block or redirect the beam. Your engineer cleans, realigns, and tests each sensor.

Safety Edge Testing

Safety edges — the rubber strips fitted to the leading edge of the gate — are tested for sensitivity and response time. Many older Horsham installations have safety edges that have hardened with age and no longer compress reliably when they contact an obstruction.

Entrapment Risk Assessment

Your engineer assesses the gate for entrapment points — gaps between the gate and post, between the gate leaves, or between the gate and ground where a finger, hand, or limb could be trapped. These risks are documented and solutions recommended.

Documentation and Report

A written report is provided after every inspection, detailing what was tested, the results, and any recommendations. This report is essential evidence that the gate owner has taken reasonable steps to ensure safety — which matters if there is ever an incident or insurance claim.

Common Safety Issues Found in Horsham

Safety Inspection Pricing

If the inspection identifies faults, Your engineer will quote any necessary upgrades or repairs separately. Safety device upgrades — photocells, safety edges, warning lights — are typically straightforward to retrofit and can often be completed during the same visit.

Who Needs a Safety Inspection?

Every automated gate should have a safety inspection at least once a year. But the following situations in Horsham make an inspection particularly urgent:

• You have just bought a property with an existing automated gate — you are now the responsible person, and you do not know the gate's history
• Your gate has never been inspected — common on older Horsham installations
• You have children or grandchildren — the risk profile changes significantly
• You rent out the property — landlords have a legal duty of care to tenants
• Your insurance company has asked for a safety certificate — increasingly common

Areas Covered Near Horsham

We cover gate safety compliance across these nearby areas:

• Gate safety compliance in Haywards Heath
• Gate safety compliance in Storrington
• Gate safety compliance in Dorking

Also covering: Broadbridge Heath, Mannings Heath, Southwater, Warnham, Rusper, Brooks Green, Coolham.